Pneumatic Material Handling System Product Overview

The Vibro pneumatic material handling system is the right choice for linear scrap removal from punch presses, lathes and other automatic multi-functional machine tools. The principle behind The Vibro pneumatic material handling system design is its pneumatic cylinder. With a slow acceleration in the forward stroke, material will be transported forward. During the rapid return stroke, material will remain stationary, thus ensuring constant movement in one direction only.

Because of its compact design, The Vibro pneumatic material handling system may be installed in cramped, congested areas. Unlike other transporters, The Vibro pneumatic material handling system does not need to be located in close proximity to the tool. A scrap removal tray can be provided to fit in close quarters at the point of scrap ejection.

The Vibro pneumatic material handling system eliminates scrap removal downtime usually associated with conveying systems. And, because it is adaptable for multi-tray installation, The Vibro pneumatic material handling system can replace more than one conventional belt conveyor. Its simple and robust design, available in a range of materials, make The Vibro pneumatic material handling system a reliable, efficient and cost effective choice.

The Vibro pneumatic material handling system is easily adaptable to meet your needs. A variety of trays can be mounted on the unit. Customers often maximize their productivity by attaching 2 or more parallel trays. The length of the tray presents no problem if you use bearing supports. Vibro industries can also provide custom bearing supports.

To increase or decrease product flow, simply turn the adjustable screw to control the movement on the tray. To control movement speed, adjust the air pressure to between 35 and 80 lbs PSI. As an option, Vibro offers a safety control to automatically shut down your system if air service is ever interrupted (your machine will automatically stop in 6 seconds).

Key Features Include:

• Two Year Warranty
• No Mechanical Springs
• Low Air Consumption
• Variable Speed (12-40 ft./min.)
• Available from Stock
• 100% American Made

Optional Features Include:

• A Cover Guard for harsh environments
• Quick Clamps for fast tray removal
• Adjustable Bearing Support for trays
• A Motion Sensor that automatically shuts down machinery if air supply is ever interrupted

Pneumatic Material Handling System Specifications

	Model 250	Model 320	Model 450	Model 850
Air Pressure Range	35 - 80	35 - 80	35 - 80	35 - 60
Air Consumption (CFM) @ 60 psi		.09	1.9
Air Consumption (CFM) @ 40 psi				3.4
Air Consumption (CFM) @ 35 psi	0.7	0.6	0.4
Feed Rate (feet per minute)	12 - 35	15 - 40	15 - 40	15 - 40
Sound Level (db-A)	60	65	64	68
Maximum Load (lbs)	25	60	125	500+
Maximum Weight of Tray (lbs)	5	25	60	100
Transporter Weight (lbs)	2	13	30	46.5

Model 250 Air Transporter
Designed to move 25 lbs of material.

Model 320 Air Transporter
Designed to move 60 lbs of mass, but can handle up to 100 lbs.

Model 450 Air Transporter
Designed to carry up to 125 Ibs., with a total capacity of 170 lbs.

Model 850 Air Transporter
The "BRUTE" with a load capacity of over 500 lbs.

Transporter Motion Sensor
Automatically shuts down machinery whenever air pressure is interrupted.

Product Line: Model 250 Air Transporter | Model 320 Air Transporter
Model 450 Air Transporter | Model 850 Air Transporter | Transporter Motion Sensor

P.O. Box 209, Port Royal, PA 17082
Phone: 717.527.2094 Fax: 717.527.2180
Email: